AP Self-sealing SMB Marker Buoy with EASIFIL Adaptor

AP Self-sealing Surface Marker Buoy with EASIFIL Adaptor (no mini-cylinder) 

The AP Surface Marker Buoy is very simple to inflate safely using any inflator hose via the EASIFIL adaptor.

The APSMBCI with EASIFIL includes:

• SMBCI - self-sealing SMB (in a choice of colours: all-red, all-yellow, red & yellow, all-black, red & black, yellow & black)
• APV35P EASIFIL - inflator hose adaptor
• AP35S - low profile elbow

N.B. The EASIFIL can be used with any make of inflator hose, not just AP hoses.

The EASIFIL has an inflator stem with no locking-groove on it which prevents the hose from becoming attached to the SMB at any point during inflation and so avoids the danger of any sudden increase in buoyancy to the diver.  The hose will be connected only as long as the diver holds it in place.

The SMBCi can also be inflated from a second stage air source via the self-sealing baffle at the bottom.

It can be inflated for the duration of the dive or used as a delayed-action deco buoy. A dump/over-pressure valve prevents over inflation and allows deflation after use

. The SMBCi will remain inflated out of water allowing it to be waved by the diver to attract attention.

An SMB mini-cylinder (0.1 litre) can be purchased separately and fitted at a later date if required.

Dimensions: 1.4m long x 20cm wide

Rolled: 23cm wide x 9cm diameter

Weight: 330g

Volume: 11.2 litres

Now also available in high-contrast, high-visibility 2-tone colours - Red & Black and Yellow & Black.